Danmotech icell series systems
Products specification
|
Mode
|
Process waste water
（t/d）
|
Size
（m）
|
Influent pipe
（mm）
|
Effluent pipe
（mm）
|
Power（W）
|
|
iCELL—0.5
|
0.5
|
1.2*0.73*1.2
|
DN100
|
DN100
|
25
|
|
iCELL—1
|
1
|
D1.4*1.6
|
DN100
|
DN100
|
25
|
iCELL2.0
Small Scale Integrated Wastewater Treating Equipment
-
Danmotech icell packaged wastewater treatment plant is STP designed for treating sewage water from single
households in rural areas for independent residential building, villas, and
residential area.
-
The icell series system is typically installed after a septic tank either in-
or above ground.
-
The population coverage of single icell stp covers 3-6 people.
-
With several different units combination, the capacity will
be increased.
Technology features of iCELL packaged wastewater treatment plant
-
Adopting modified
A/O process, combining the advantages of traditional activated sludge and biofilm technologies with stable operation and treatment efficiency .
-
The patented fixed plate biofilm carrier inside can effectively enhance COD
and TN removal performance.
-
The effluent
quality can conform to one-class B permitted
criteria of Discharge standard of pollutants for municipal wastewater treatment
plant (GB18918-2016).
-
Optional for powered from solar panel, which can solve the cost for the
operation.
-
Optional for intelligent monitoring system, and change the operation
modes remotely.
-
Treating capacity
of single module: 0.5-1 t/d for 3-6 persons.
-
Effluent water
quality can meet the standard of mixed water for urban utilization like toilet
flushing, afforestation, street flushing, etc.
-
Intelligent
control, fast repair with seldom maintenance.
Details:
Treating process:
1. the waste water gravitates to A/O process icell stp unit for contact oxidation after pre-sedimentation in septic tank.
2. biological reactions such as degradation of organics, nitrification and de-nitrification of nitrogen were carried out in A/O process icell packaged wastewater treatment plant.
3. The water goes to sedimentation tank after A/O process.
4. The precipitated water is separated by the slag trap for reducing the left SS .
5.The disinfected water enters the clear water tank, and the effluent is discharged or reused in accordance with the required standards.
The advantages of icell 2.0
-
Highly integrated system, easy to install and testing, low failure possibility
-
Short start-up time, less residual sludge and a long mud discharge cycle
-
Good effluent quality, can be used for flushing, greening, irrigation, etc
-
PE material is selected, no pollution, with long service life;
-
High performance, stable water output
-
No noise and no secondary pollution
-
Integrated solar power supply, zero operating cost.
For more info, please contact us any time!
